On Wed, 17 Aug 2005 09:51:18 -0400, Jeff Taylor wrote:
Gunner wrote:
On Tue, 16 Aug 2005 20:30:55 -0400, Jeff Taylor wrote:
jim rozen wrote:
In article , Gunner says...
What you are wanting is an old Ramco second ops lathe, or even a
Hardinge HSL.
Or an HC.
Jim
Did either of those models have 1-1/4" through the spindle capability?
The small Hardinge lathes that I've seen are all 1-5/32" max.
-JT
Some of the Ramco's did indeed. The HSL is a basic 5C spindle
Gunner
Thanks, I'll keep an eye out for a Ramco.
-JT
Also look for a "Wade" second ops lathe. Some of those were 16C, 1
5/8" or bigger
Gunner
The two highest achievements of the human mind are the twin concepts of "loyalty" and "duty."
Whenever these twin concepts fall into disrepute -- get out of there fast! You may possibly
save yourself, but it is too late to save that society. It is doomed. " Lazarus Long
|