In article , John Flanagan says...

Dear All:

I've got a part I need to machine (repeatedly) and was wondering if
anyone might make a suggestion for an effective and inexpensive
method. A photo of the cut that needs to be made can be found he

http://vulcan.blacksburg.net/~flanag...eeve%20RFS.jpg

If you had a lot of them to do, I would consider making a profiled
plain milling cutter (to match the smaller diameter) and then simply
do the entire piece with one pass on a horizontal.

Jim


--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================