"Mike Pio" wrote in message
news:yNNJe.174002$go.41421@fed1read05...
"Leon" wrote in message
. ..

"Mike Pio" wrote in message
news:vlNJe.173995$go.172212@fed1read05...
Hello,

I have a good friend who has a Jet table saw, and I'd like to surprise
him with a rolling stand for it. I don't know the model number, but I
do
know some of the specs. It's a 1 3/4 HP saw wired for 110 V, a 30"
fence
and one cast iron wing. It has a steel closed cabinet and is not open
like a contractor saw.


You really should get the model number and determine if the saw is a
left
tilt or right tilt. On cabinet saws the left tilt and right stands are
different mostly with the orientation of the wheels. If you put a
right
tilt mobile stand on a left tilt saw the saw can tip when the blade it
set
to cut a bevel. You really need to be right on this purchase.

The access to the motor is on the left side of the cabinet, so I suppose
that makes it a left tilt. Does that help any?
Maybe, maybe not. Which way does the blade move when you adjust the tilt
angle?
Jim

-m