View Single Post
  #14   Report Post  
Les
 
Posts: n/a
Default

Thanks all for the replies....

Here are a few additional facts that would be pertinent to my original
question.

1) Current range hood is on the "main" breaker, which is 70 amp

2) Tech support of microwave said it requires at least a 15 amp circuit; it
is a 950 watt microwave.

3) Currently have counter microwave which is plugged into socket controlled
by "main" breaker. It also is 950 watt.

4) Only one person works in kitchen at a time, and microwave and range below
would not be used at the same time.

5) The " main" breaker controls lots of stuff in house. (but not sure
exactly what!)

Again, my question is if you guys think I am wired OK now? If not, and I
continually trip the breaker, I would then call an electrician to create a
separate breaker for the microwave. A GE technician will be doing the
microwave installation.

Any further comments would be appreciated.

Thanks in advance.

--
Have a great day, except you spammers
To email, remove the obvious

.......
"SQLit" wrote in message
...

"Les" wrote in message
.. .
Planning on buying all new kitchen appliances, since they are all about

18
yrs old. Currently have a hood over the range that has a fan and light

as
part of it. I would like to replace the hood with a microwave oven over

the
range.

My condo is 18 yrs old. Can I assume that since I have electricity with

the
hood, that the electrical wiring is ample for the microwave, like the
salesman says? Or how can it be tested to make sure that the current
electrical wiring is OK?

--
Have a great day, except you spammers
To email, remove the obvious


By electrical code microwaves are considered fixed appliances, they need
there own circuit.
If your home is older than 18 years then I can almost guarantee that there
is not a separate circuit for the hood/light combo. We just did not do

that
back then.

Will it work, probably. You might trip a breaker once in a while until

you
figure out what else is on the circuit the new microwave is going to be
connected to.

If it is easy to install a new circuit for the microwave I would.

Other issues you may have not thought of are back then we would have run 3
wire circuits to the appliances, like the oven and cook. If your new stuff
is electric best check to see if they need a 4 wire circuit. 4 wire
includes a neutral.

Does your local building department require upgrading anything when
upgrading the kitchen?
A quick call with out your last name will find out for sure.