Hello Chuck,
I will apologize for mistakenly calling you a dealer of Stubby Lathes. I had
already been set straight on that, however, your posts had seemed to be very
critical of Teknatool, which I believe to be an excellent company. I have
e-mailed Roger Latimer of Teknatool requesting information about the Nova 3000.
If it is in fact being discontinued, I'll also post an apology on that item
also.
I don't quite get the statement: "the pot calling the kettle black". If this is
the feeling of this newsgroup, then I apologize to the group. Never, have I ever
intentionally done anything underhanded to promote my business, nor do I ever
plan to do so.
Fred Holder
http://www.fholder.com
In article , Chuck says...
On 15 Jul 2005 12:23:36 -0700, Fred Holder
wrote:
Well Fred,
Maybe you should back off, clean your glasses, read the thread again
and then apologize.
Not only do I not sell stubby lathes, I also posted the quote from
email from the Teknatool representative confirming that the Nova 3k
has been discontinued, and if you think I'm a liar, you can email them
yourself,
Talk about the pot calling the kettle black.
I'll be waiting for your apology.
I note that you seemed to have started the thread on the Nova 3000 stating that
is was sad to hear that Teknatool is phasing out the Nova 3000. I just took a
look at their web site and there is no indication that the Nova 3000 is being
phased out. This wouldn't be a ploy to get people who were thinking of buying a
Nova 3000 or Nova DVR 3000 to consider purchasing a Stubby from you by any
chance would it?
Your original post stirred up a lot of posts, but would you like to prove that
you're not trying to use the newsgroup to promote your business? I feel open and
honest advertising on the newsgroup is acceptable, but underhanded advertising
is not in my books.
I don't post much on this newsgroup anymore because of people trying underhanded
things like you and the sometimes severe attacks on people, I'm not blaming you
for those attacks, however.
Fred Holder
http://www.fholder.com
In article , Chuck says...
On Fri, 15 Jul 2005 15:08:27 GMT, Bill Rubenstein
wrote:
Ok, I feel that it is time for me to weigh in on this thread. Maybe a
different perspective may be of interest...
Thanks for the input. As a retailer, I would really like to hear your
take on it.
prototype of a new and less
expensive model -- the F600. It is missing some of the unique features
of the Stubby S750 and S1000 but it will be every bit as robust and nice
to use as its big brothers -- just more limiting.
Heheh...I think you already can gather MY opinion on this.
It will also be cast iron -- lots of it because cast iron is a major
part of what gives the Stubby product line its robustness, freedom from
vibration, long life and all the rest of the things which go with the
name Stubby.
Amen, brother. That's what I'm talking about. It IS possible to offer
a lower-priced, yet quality product to a broader slice of a decidedly
limited buying public.
While it will be less costly than its big brothers, it won't be able to
compete price-wise with a lot of other machines -- it will still be on
the upper side of $3000.00 and pushing $4000.00.
Hey, they've got the right idea. While it's out of _my_ league for a
while, it is certainly a lot closer than the big brothers are. What
will be the motor, swing and length options, do you know yet?
Does it make sense for us to have
what we would always need to consider an inferior product just for us to
have an entry level product? Might users of our entry level product,
when ready to upgrade, look elsewhere because of the short-comings of
our entry level product?
As I've said, if Stubby or any other company can maintain their
standards and offer a lower-priced product to get people into the
driver's seat, they're going a long way toward creating brand loyalty,
and just ask any car dealer what that's worth. I think you've
answered your own question, if you're talking about a fabricated
(rather than cast) unit. It _would_ be inferior and wouldn't meet
Stubby standards, so they'd be getting away from the formula of
maintaining quality and performance standards. That won't cut it,
even with an entry-level product.
It certainly is possible to cut bells and whistles and maintain
overall quality while at the same time dropping overall cost and
thereby retail cost. ( I keep falling back on car-makers, but they
have so many different models and are such a ubiquitous product that
everybody can relate.) Car manufacturers do this all the time, always
looking for a bigger piece of the pie, and if it's done right, it
works.
I really am asking for opinions and would like to hear what others say
about it. I've rejected the idea of selling a fabricated machine but
maybe I'm wrong.
No, I think you're right on the money, personally, for the reasons
stated. That's just one man's opinion, but what more can one man have
anyhow?
--
Chuck *#:^)
chaz3913(AT)yahoo(DOT)com
Anti-spam sig: please remove "NO SPAM" from e-mail address to reply.
September 11, 2001 - Never Forget
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----
--
Chuck *#:^)
chaz3913(AT)yahoo(DOT)com
Anti-spam sig: please remove "NO SPAM" from e-mail address to reply.
September 11, 2001 - Never Forget
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----