On Tue, 05 Jul 2005 21:46:33 +0000, Arthur wrote:


"Ed Sirett" wrote in message
news
On Mon, 04 Jul 2005 01:33:59 +0100, John Rumm wrote:

Arthur wrote:

I want the mixer to be a tap under which we can wash our hands etc under
warm/hot water.
The cold for both taps is mains supplied.

How about two ordinary taps, but with the feed to the hot one coming
froma thermostatic blending valve so that it only delivers hand hot
water?

Or even the same with a monobloc mixer fed with hot or blended hot and
mains cold. Nearly all the mixer taps these days are bi-flow and suitable
for connection to potable supplies - but check just in case.


--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html



Sorry for delay in replying.

I have a monobloc mixer on the kitchen sink, as in 2 tap tails close
together through a single hole.
So I'm hoping that a wash basin equivelant will fit through a hole in a
regular 2 hole basin.

As per previous posts the monoblock holes are 35mm the 2-hole basins are
clearance ion 1/2" BSP around 23-25mm.


--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html