On mine there is a strip of wood at the top held in by 5 wood screws, remove
the screws and the strip,( careful the door does not fall intowards you) the
top of the door will tilt in towards you, once its cleared the frame lift it
out of the frame.

Tom

"Nick Plume" [email protected] wrote in message
...

"EvoDawg" wrote
Having trouble removing patio slider door to replace rollers in the
bottom
of door. Usually you just pull up on the door to clear the bottom track
and
angle the door out. This door is not clearing the track. Is there
something
I'm missing?

Are you sure you're clear of the stops in the top track (so door can't be
removed from the outside)? They are usually a nylon/rubber/or neoprene
stop
with a screw run through the center. Maybe someone installed an extra
stop
where it usually doesn't belong.