I made it pretty much exactly like Jeff Gorman's plans at
http://www.amgron.clara.net/sharpeni...ig/hgindex.htm.

I'm sorry I am in a location where I don't have access to my digital
camera.

Bob


Ah yes. Me too, currently in the making but something of a variation from that
exact design. I laminated two slats of hard maple, rounded the front underside,
brace drilled a 1/4" hole to center the lever cap which is now mounted with
slotted round head machine screw, brass washer and wing nut underneath, the
edge of the lever cap is 1/16" up from the front cutting end of the jigs main
body. Still need to come up with a wheel design and it's mounting legs.

Do you have any suggestion as to an axle hardware that will work well through
a section of dowel as the wheel, yet connect to flat maple slats (as the legs) and
still be able to spin without binding?

--
Alex - newbie_neander in woodworking
cravdraa_at-yahoo_dot-com
not my site: http://www.e-sword.net/