On Sun, 9 May 2004 22:14:42 +0100, "John Stumbles"
wrote:

"Vortex" wrote in message
...

Actually I was thinking of the Fernox Gel so the capacity is a non issue
really.

Cheaper to buy a cheap pump-spray (Hozelok garden sprayer type) and
bog-standard liquid Fernox and use the sprayer to squirt the liguid in
through the filling loop connection point (with suitable adaptation to
sprayer to get it to 15mm or 1/2" BSP)



My patented adaptation to do that is:

- Cut aluminium tube of sprayer lance.

- This fits an 8mm compression fitting.

- Short length of 8mm copper tube for other side of fitting

- 8mm solder female x 15mm male adaptor

- 15mm compression service valve with nut and olive on one side
discarded. A male to male compression coupler would do, but I had a
discarded service valve.

- Connect filling loop braided hose to above

- Pump away. (as it were).




..andy

To email, substitute .nospam with .gl