You may be lucky and just have a slipping main belt. If you hand rotate the
flywheel (the correct direction) you can sometimes cycle the mech and return
it to the stop position. The belt would still need changing though, and
thats not easy

If you're not familiar with electrical equipment, I don't suggest you try
though, its tricky etc...


Aw

"Nathan Gutman" wrote in message
...
This system has two decks A and B. When I press a lever the tape door
is supposed to open to take the tape out. I press the lever in deck B
and the door does not open.
How can get the tape out on this system?