This advice does not seem appropriate to me - grease on the switch contacts
is NOT a good thing - a little grease on the rocker is OK, but only there.

I would suggest cleaning the contacts with CRC, apply a little high melting
point grease (silicon?) to the rocker bearing surface, and reassembling.

David

"George E. Cawthon" wrote:

. Now
that you've got the switch apart, I suggest you
just stir up the grease as you did. If you want
to clean it, spray it with WD-40, then regrease
with a silicone grease-- bicycle grease would be
great.