"Don Sforza" wrote in
:

With the very tiniest of Dremel bits you can "dig out" the offending
screw (both of the ones you mentioned, actually). Then drill out the
area with a 1/8th or 3/16th drill and glue in a dowel of the
approaipiate size. Redrill for the brass screw. DAMHIKT. Works llike
a charm... twice on the same hole, even.


And next time, run in a steel screw to cut the threads, remove it, and then
put in the waxed brass screw. DAMHIKT2

Patriarch