boy you have a good question, i cant answer that.


The circuitry has two fuses

the one closed to the battery , is a 40amp fuse, and theres one
closer to the motors which is the thermal fuse in question. I am
guessing the 40amp fuse is the primary fuse for the load???




On Sun, 01 May 2005 19:11:51 GMT, "Travis Jordan"
wrote:

rutman wrote:
The thermal fuse was connected to the positive cable that feeds power
to two 12volts 230 watts motors.
Any ideas what rating the thermal fuse is?

Assuming both motros can run at the same time.....(230/12x2) would be
the minimum. Are you sure the 40A fuse is the primary fuse for this
load?