I'm fairly sure it's a diode. There's another on the board and it checks to
be a diode. The board layout has only 2 connected pads. If it were larger,
I'd remove the other from the board and apply voltage to it to see if it had
a breakdown voltage near 6.8v but the physical size would make it difficult.






"Enrico" wrote in message
news
Probably is a transistor...
Test it with the tester in diode mode to find base-collector-emitter.

Bye!

"pbabin" ha scritto nel messaggio
...
http://www.bcae1.com/images/surfacemount.jpg

I guessed that it was a 6.8vz but I can't find any zeners that use this
type of marking.

Thanks in advance


--------------= Posted using GrabIt =----------------
------= Binary Usenet downloading made easy =---------
-= Get GrabIt for free from http://www.shemes.com/ =-