Upon installation, I found that the post is a bit too long. It contacts the
banjo's locking bar mechanism before the bar gets below the axis of the
lathe. A shorter post is not available.
Should I:
1. Send is back and buy an entirely different product? If so What is a
better choice?
2. load up a metal-cutting blade in the recipricating saw and lop it off
3. Other?
Thanks,
Steve
I had a similar problem, but didn't have any means of cutting it to
length, so I took it to a machine shop, and they ran it through their
bandsaw. I think that they only charged me a buck or two.
--
Dan Kozar
remove NOSPAM