On Fri, 08 Apr 2005 16:05:32 -0500, Chris W wrote:

I have a control box with a 2 wire cable going out to a SPST switch that
switches 120V AC line. I want to put a socket on in the box and a plug on
the wire with the switch so I can disconnect it when it isn't needed. The
easiest thing I can think of would be to use a standard 2 prong outlet
and plug. The problem with that is, someone might find the cable with the
switch and plug on the end, wonder what it does, plug it in and flip the
switch. Best case, they trip a breaker, worst case something starts on
fire. So I don't like that idea. I have been searching Mouser and
Digikey and the only other panel mount socket and matching plug I have
found are the round ones that have from two on up to 100 or maybe more
conductors. Even the 2 conductor versions are around $30 for the plug and
socket. I was hoping to spend a lot less money than that. Any
suggestions?

Jones Connectors.
http://www.google.com/search?&q=%22jones+connectors%22
First hit:
http://www.action-electronics.com/cinch.htm

Have Fun!
Rich