In article wthVd.57$Qz.46@okepread05, Grady says...
I am tramming a Homier mini mill and the column is out vertically, leaning
toward the front. I have exhausted all local supply house trying to find
some .001 and .0015 shim stock, short of buying 50 or 100 ft rolls. I need
about a foot of each max, 1/2 inch wide. I would be willing to buy some from
someone for a reasonable price if you have it readily available. All help
greatly appreciated.
Do not use any paper or polymer shim. Stick to steel.
I would even avoid brass for this.
Jim
--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================
|