In article , Proctologically Violated©® says...

Can I just use my regyoolar O/A , w/ a highly reducing flame

You don't need a highly reducing flame. A neutral one works
just fine. But be aware that you have a lot more heat at
your disposal, so if it took a flame that was 1/4 inch
in diameter to do a sweat fitting (say, for example, an
half inch elbow to to pieces of half inch pipe) and it
took a minute to get that up to temperature, you can
use a flame that is smaller (say, 1/8 diameter) and it
will be ready to flow in about 15 seconds.

Jim


--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================