In article ,
"Mark Angel-Trueman" writes:
Hi,

My indesit WE125 washing machine has decided that bladder control is a
non-neccessity during the rinse cycle and empties itself all over the
kitchen floor.

Its not a drum seal problem i dont think, as i assume that the same would
happen when its doing the detergent cycle. Dont think its a pump either, cos
i assume that the same pump is used for both the detergent cycle and the
rinse. It only happens when the machine enters the cycle to rinse (with 20
minutes to go or so).

Im trying to rack my brains as to what might be causing it. The water comes
out from under the machine near the front. Its almost as if the extra water
throughput is causing an overflow somewhere, but its not in the detergent
tray as the water is flowing out of that at the normal rate.

I opened the thing up but i cant see any obvious faults.

Anyone got any ideas?

Rinse might be a different (higher) fill level, which finds a leak
which the normal wash level doesn't reach. Have you checked for
split door seal (including the rubber folds between the machine
front and outer drum)?

Might be using a different water valve, e.g. to add the conditioner,
which has a split hose or blocked outlet into the powder/conditioner
drawer.

--
Andrew Gabriel