Mark Angel-Trueman wrote:
Hi,

My indesit WE125 washing machine has decided that bladder control is a
non-neccessity during the rinse cycle and empties itself all over the
kitchen floor.

Its not a drum seal problem i dont think, as i assume that the same
would happen when its doing the detergent cycle. Dont think its a
pump either, cos i assume that the same pump is used for both the
detergent cycle and the rinse. It only happens when the machine
enters the cycle to rinse (with 20 minutes to go or so).

Im trying to rack my brains as to what might be causing it. The water
comes out from under the machine near the front. Its almost as if the
extra water throughput is causing an overflow somewhere, but its not
in the detergent tray as the water is flowing out of that at the
normal rate.
I opened the thing up but i cant see any obvious faults.

Anyone got any ideas?


Filter/pipes bunged up? Try removing, and cleaning, the filter, and while
it's out blow into the outlet pipe. I know it sounds mad but it worked on
mine a couple of weeks ago - no split pipes or anything, same symptoms as
yours. It's worked fine ever since.

Si