wrote in message
ups.com...
Hi,

Have a 1926 San Francisco home with a Carrier WeatherMaker 8000 gas
furnace heating system installed. We wanted to update the old mercury
thermostat with a digital programable one, mostly to avoid having one
person wake up early, turn on the heat, and come back to bed every
morning.

We purchased a Honeywell RTH7400D unit (5+1+1). Now I'm feeling like
an idiot because I can't get the damn thing to turn our heat on!

The old set was very simple: two wires connected. One to "R" and the
other to "4". The manual says to remove the jumper between RC/R and
install the two wires with "R" = "RC" and "4" = "R". Done. Doesn't
work. Hook the old up and it works fine. Bump the wires together and
it works fine.

Tried different settings and adjustments to no avail. I hear the
internal 'click' when the Honeywell turns "on". But it doesn't start
the heat unit.

Does anyone have any ideas??? I'm feeling pretty incompetent as my
wife's girlfriend took her new thermostat and two wires and was hooked
up and running within 30 minutes.

There are two wires running to the mercury from the "R" spot on the old
thermostat if that makes any difference.....

-JC-


Try asking these folks:

Honeywell International Inc.
101 Columbia Road
Morristown, NJ 07962
Phone: (973) 455-2000
Fax: (973) 455-4807