wrote in message
ups.com...
My new taps seem to just have 1/2" thread holes and are supplied with
copper pipes (15mm which thin to 1/2").

I'd rather use flexible connectors but can't find this sort of thing
anywhere.

Is there such a thing as 15mm (compression or push-fit) one end to 1/2"
screw on the other end? If so, where can I get them from?


Are you sure the threaded part is 1/2"? You will probably find they are
either 10mm or 12mm. If so you can get these from most sheds and plumbers
merchants or alternatively from Screwfix and Toolstation as below:

http://www.screwfix.com/app/sfd/cat/...84026&id=27936 (10mm)

http://www.screwfix.com/app/sfd/cat/...84026&id=91351 (12mm)

http://www.toolstation.com/shop/Plum...ors/d20/sd2807
(last item on the list). These are a little dearer than Screwfix but they
offer
free P&P at the moment.

HTH

John