Thanks a lot for all the advice. It seems to be working fine now through the
scart. You have already answered my other question regarding whether I could
connect through the VCR rather than a selector box, so I will get another
scart cable tomorrow. Thanks again guys.

Alex

"Barney" wrote in message
As Graham said the screw adjustment has been replaced by a digital
adjustment which is done via the VCR setup - you will have to consult the
VCR's manual for this. I presume the two scart sockets on the VCR means
one
is input and one is output. The scart from the DVD player goes into the
input socket and then you just ned one lead out to the TV for both the DVD
and the VCR. If you use a scart input the patterning should disappear
because the RF input is not being used.
I hope this is of some help.