View Single Post
  #2   Report Post  
John
 
Posts: n/a
Default


"jeff" wrote in message
...
Hi,

After changing filters in the reverse osmosis system, how long does it
take for the tank to be fully charged?

Is it normal to see the water in the return line (clear plastic line) flow
swiftly into the drain as the tank is charging?

Thanks,

Jeff M



The water should come out the drain continuously as it makes water, but I'm
not sure what you mean by "swiftly". If it appears to come out at incoming
line pressure, make sure you're not missing a filter gasket. As far as how
long it takes to recharge the tank, you need to know the rating o the
membrane, for example: 25gpd (gallons per day). Figure roughly 1/2 the
rating for actual production. If your water pressure is very low or very
cold, it can be as little as 1/3 of the rating. The rating is determined at
a lab controlled temp and pressure, and of course, that is not reality, but
gives you a relative value. Since your tank probably holds a little over
two gallons of water, it takes about 4 hours to charge using a 25gpd
membrane. Keep in mind these are rough estimates.

John