The problem is the ribbon cable that connects the display to the board.
Sharp uses a thermaly activated glue to stick the ribbon cable to the
display and to the board. The cable ends can be heated with a hair drier to
reactivate the glue then apply pressure by wiping a finger tip accross the
cable connection until it cools(if you have a low pain tollerance, use a
pencil eraser). This works about 80% of the time.

Tom
wrote in message
oups.com...
larry2shoes wrote:
My unit only displays partial data. The 'time' feature that is
displayed

There is a repair service for this.

It runs $32.50 postpaid.

Details are at http://www.tinyurl.com/yvcgr