Hi PrecisionMachinisT, hope you are having a nice day

On 27-Jan-05 At About 07:56:28, PrecisionMachinisT wrote to PrecisionMachinisT
Subject: Heat pump icing up

P From: "PrecisionMachinisT"


P In a pinch you can force the condensor to defrost by putting the stat
P into cooling mode and setting the inside temp to about 40
P degrees.....the ice should all melt off it in about ten minutes doing
P it that way. Cold air will blow out the registers while that is
P happening.

This won't work due to the fact the outdoor motor will run. the only way to
defrost it is to also stop the outdoor motor. This should not be attempted
unless you know what you are doing.

-= HvacTech2 =-


... "Fasten your seatbelt. I'm gonna try something." - s.w.

___ TagDude 0.92á+[DM]
++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++
spam protection measure, Please remove the 33 to send e-mail