In article .com, jmiguez
says...

Jim, I will follow your URL. I may also check into getting a new
cross-slide made with "T" slots that will accept a compound slide
and a milling attachment. The cross slide "Vs" are a straight
forward 2 =BD." The treading on the screw looks strange.

Ha ha. If your machine is close to mine, you might
be suprised at those lead screw threads.

Mine are double square. That's a real oddball.

There are two starts on the threads, 180 degrees apart.

Jim


--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================