Clark Magnuson wrote:
I have a 2" long, 1/4" square Cobalt tool bit I have ground for
cutting internal threads with a boring bar.
The bit is too long to fit in the hole in the work.
My Dremel cut off wheel is very slow, and grinding an inch off would
be worse.
TIA
Score it with the dremel, stick it in the bench vice and snap it off with a
well placed hammer blow.
Regards.
Ken.

--
http://www.rupert.net/~solar
Return address supplied by 'spammotel'
http://www.spammotel.com