"Chris Lewis" wrote in message
...
According to TURTLE :
This is Turtle.

Look Nemo , You can hook all the wires together and just run everything on a
100
amp breaker and make it run but if you want to have it legal and leave NO
chance
to error. You will have to install the right equipment and the right circuit
arrangement to leave no chance for error. If you add up these thing you get
this. Electricity + It will work + and it didn't cause a problem + I guess
it
will Do = a Call to the Fire Department soon.

Breakers are for wimps. So is wire insulation. Just run everything using
bare
steel fence wire off the pole transformer.

If anything overloads, the wire will glow telling you what lightbulb you have
to turn off.

[That's a joke! ;-)]
--
Chris Lewis, Una confibula non set est
It's not just anyone who gets a Starship Cruiser class named after them.

This is Turtle.

You don't need to look for the Red wire when over loaded. All you need to do is
pile some paper on the wires and it will give you a signal fire to tell there is
a problem. Red wire are hard to see in attic but a signal fire will be seen real
good.

TURTLE