"Brian in Hampton" wrote in message
news:ABXEd.1931$SS6.331@trnddc07...
Looked at the pic and they are not milled I can see the die marks on them
from the press....they may say that, but I see otherwise....Brian

"Mike Marlow" wrote in message
...

wrote in message
...
On Mon, 10 Jan 2005 20:14:11 -0800, "mp" wrote:

Confession time. I did not check whether they were milled or not.
Edwin
asserted that they were and I just took his word for it - lazy me.
I
had
previously thought they were just stamped based on the picture on
the
web
site.

They're milled to within .002" per side.



I missed that. where does it say that?

I followed one of the links that someone posted to the manufacturer's
site
and I did see it there. See if you can find one of the posts from the
last
couple of days - after the date of my comment above, and you should find
the
link.

--

-Mike-





Brian they are milled on the reference surfaces - on 3 faces, to within
..002" over 6". Material is sheared and bent aluminum - 3/16 thick...

The web copy is being/has been updated....

Cheers -

Rob