99windstar wrote:
We have a bath tub that has one of those stoppers that has 'push' printed on
it. I push it to fill the tub, push it again it pops up and drains the tub.
How one earth can I remove this stopper completely from the tub? I need to
unclog the drain plus I would rather use some other stopper since this
current stopper does not hold water in the tub when taking a bath. It slowly
lets water drain, grrr takes a very long time to fill a soaking tub when
water isn't being stopped.


IIRC, on that one the "knob"will spin freely if you try to "unscrew"
it. What you do is lift the knob up as you slowly turn it. You should
feel a point where it catches and won't turn. Holding it there, put
a plier on the knob and turn CCW. That *should* remove the stopper
if memory serves.

Replacing the whole thing may turn out to be a nightmare as it
involves replacing the tub "shoe" and gaskets underneath.
If you get the stopper out, look for a rubber seal or O-ring
which is worn and allowing the water out.

Jim