In article dX%zd.574471$wV.92948@attbi_s54, Abrasha says...
It is the same one, and ALL the specs in my manual are identical, except the
taper of the spindle, which says it is a #7 B&S taper.
Try a MT2 shank in the head. If hardinge screwed up and
fabricated the wrong dimensions on the collets, they *will*
take them back.
Jim
--
==================================================
please reply to:
JRR(zero) at pkmfgvm4 (dot) vnet (dot) ibm (dot) com
==================================================
|