|
|
|
|
Quote:
|
Originally Posted by Peter
"dezzie" wrote in message
...
Hi All,
Need a little help with my Zanussi FLE 1416. Got home from work one day
to find it beeping away merrily and full of water after failing to
drain. When i opened the fluff filter it was full. So i cleaned it out
but since then i can't get it to run through a cycle properly. I have
checked the drain is clear, the inlet filter, blown through the
pressure switch line to check they are clear and heard the switch make
and break. I enter the engineers menu and it told me the last fault was
the fluff filter, I stepped through the engineers menu and all the
different features worked. It prewashed, washed rinsed, heated the
water, slow spin, high speed spin and then drained down. I switched the
machine off the exit engineers mode, select a program and it starts
washing and after a couple of minutes it just stops at no particular
point, sometimes it will run on for about 20 minutes.
I called a local engineer in who after looking at it for 4 days told me
he couldn't find anything wrong but it wouldn't run throught for him. So
he brought it back and still no machine.
so I wondered if anyone out there could help me.
At the point it stops it should flash up an error code if not what happens ?
Peter |
It just Flashes the start/pause LED and sits waiting it doesn't flash any of the error codes or beep.
thanks mate and all the best
|