Yes, the strips would be used as counter top edging.
Philly
"Martik" wrote in message
news:Ax5xd.1321$Y72.664@edtnps91...
"philly" wrote in message
ink.net...
What's the best sabre saw model to use for cutting narrow strips about
2"
in
width from full 8 foot sheets of laminate?
Use a carbide tipped tool to scribe thru the color coat, then snap apart
or
Use a straight router bit
Are you using the strips for the edge of the countertop?
If so, you can trim the top edge with a router flush trim bit using the
countertop as a guide
|