Mike Rocket J. Squirrel Elliott wrote:

So lemme get this straight -- with something like a metric Forstner
bit, you drill a hole into the edge of the cabinet side and the rear
of the door. Shove these puppys in and tighten the screw to expand
the body. Pretty clever!

Yeah except that the holes have to be drilled *precisely*. And even
with 10mm there isn't much leeway on the sides going into 3/4" stock
from the edge.

They are useful hinges but I wouldn't use them in particle board...I
suspect they would work loose in short order.

--
dadiOH
____________________________

dadiOH's dandies v3.05...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico