On Fri, 1 Aug 2003 12:38:47 +0100, "David W.E. Roberts"
wrote:
I can't solder to save my life, despite years of trying.
I found the key issue was preparing the solder joint, which means
liberal use of wire wool on the pipe to be soldered, followed by a
smidgen of flux before bringing the joint together.
Any residual dirt on the pipe invariably leads to a poor joint.
I prefer the pre-soldered elbows though.
Andrew
Do you need a handyman service? Check out our
web site at
http://www.handymac.co.uk