On Tue, 09 Nov 2004 03:02:18 GMT, indago
wrote:
Once the tank is emptied, put all the fittings back in and sealed properly
with some thread compound and then, as already suggested, turn the pump back
on and let the tank refill. ...

Thanks, it is working now. When it was cycling every 2 or 3 seconds,
the pressure gauge was dropping very low very quickly and then going
back up very quickly when the pump kicked on. The needle was bouncing
around like mad. Now it cuts on when it gets down to 42 PSI and cuts
off at about 56 PSI, and it moves gradually and takes several seconds
to do it. I assume that 42/56 PSI settings are OK.

Tanks :-) to everyone who replied. You're the greatest!

---
Replace you know what by j to email