Hello group,
Building a new house and several things had to be redone. The most
important was the vent hood over the cooktop which is a brand new Dacor.
The people who were working on the vent scratched the front edge of the
Dacor. They are very fine scratches, much like the scratches that make up
the pattern in the stainless. It appears to me that if one was to use a
light abrasive you could correct the scratches back to original. The
builder said "Barkeepers Friend" should fix it right up. Again these are not
gouges, but fine rubbing scratches so it looks like an easy fix but wanted
to check. Thanks! John