Dr B wrote in message hlink.net...
Hi Jeff
The pump removes all the water from the tub, and continues to run.
If I pour a gallon or so of water into the tub, it is promptly pumped out.
I have the side panel off of the machine, and can see that the float
moves just fine.
The switch has continuity. There is no voltage at the switch terminals when
the machine is on and the pump is running.
There is a very small amount of water in the base, but not enough
to move the float rod.
Everything seems to be working as it should, but the pump still
runs.
What am I missing here?

Hi,

Remove that water from the base. No power will often show at the
switch as many of the switches are on the neutral side.

This may help...
http://www.thermador.com/replacement...ting-guide.pdf

Acrobat Reader required to view and the link should be all one line.

jeff
Appliance Repair Aid
http://www.applianceaid.com/