I bought the delta and had some issue moving it over to accomodate the different
slot position for a left tilt saw. I stripped the head on one of the hex bolts,
all the fasteners seemed to be exceedingly soft (read cheap). Just thought the
fasteners could have been much better quality. Otherwise works well, I'm not
terribly partial to it since I often cut one and two offs quicker with hand
tools.

David



In article , Brikp says...

OK - Tennoning Jigs. Any recommendations?

Considering

$79 Shopfox Woodstock -
http://www.grizzly.com/products/item...emnumber=H5782

$85 Delta 34-183
http://www.amazon.com/exec/obidos/tg...86427?v=glance

$109 Jet 708111
http://www.amazon.com/exec/obidos/tg...&s=hi&n=228013

$106 Rockler http://www.rockler.com/ecom7/findpro...=10185&clk=412

I did a Google search and read the comments about quality of the delta and
that the Jet and powermatic are identical. I have not read anything about
the shopfox or rockler. I did see some previous posts about having to tweak
the miter guide rail on some saws. I have a Grizzly 1023 right tilt. I'm
thinking the shopfox should be as close to plug and play. Are the slot to
blade measurements the same on Griz and Delta and PM?