jeff wrote:

Unplug washer. Remove agitator from washer by pulling straight up on
it, some agitators have a bolt under the cap, remove cap and look for
a bolt first. Remove the agitator bearing from transmission hub. Get
top up by pressing on 2 clips located about 6 in in from side between
top and cabinet. Putty knife or flat blade screwdriver works well
here. Take the filter flow tube off. Lift top. Remove three bolts
holding basket to hub. Lift basket out of washer.

Just to add my usual cautionary note re this, use ONLY A ***12 POINT***
1/2" SOCKET ON THESE BOLTS. Nothing else will work.