What does the manual say the circuit should be rated for?
--
Joseph E. Meehan
26 + 6 = 1 It's Irish Math
"Tom" wrote in message
news
k7gd.321434$MQ5.224771@attbi_s52...
I have a Sears 25 gallon/4HP horizontal compressor. When I first turn it
on
it runs fine and shuts off at 150psi. The problem I have is when the
pressure gets at the level where it automatically kicks on again it then
pops the breaker off and I then have to reset the breaker before it will
run
again. I have a dedicated 20 amp circuit with 12/2WG using a Square D
breaker and a 20 amp duplex receptacle for the compressor, and nothing
else
is on this circuit. Do any of you folks have any suggestions as to how I
can
cure this problem? Thanks for your help.