Jim wrote:
My doorbell buzzes at the same time it ding dongs. It only buzzes as
long as the button is being pushed. What is up?


The solenoid coil which drive the chime "bonker" typically runs on 24
volt AC current.

It sounds like maybe the hole in the solenoid which the bonker slides in
may have gotten worn to the point where the bomker can rattle around and
buzz under the influence of the AC magnetic field.

OTOH, maybe something's just come loose in the assembly which is
vibrating when pulled on by the AC magnetic field. Since those chimes
run on low voltage AC it's safe to pull the cover off and have a look
see and gentle probing of the stuff inside while someone leans on the
doorbell button to see if you can make the buzzing stop. Don't overdue
the holding of the button, stop a while and let the solenoid cool down
if it start getting warm

If you get lucky you may find a loose part you can bend out of the way
or put a little glue (or if you're desperate enough, even chewing gum)
on to make it shut up.

Let the group know what it turns out to be.

HTH,

Jeff

--
My name is Jeff Wisnia and I approved this message....

(W1BSV + Brass Rat '57 EE)

"As long as there are final exams, there will be prayer in public
schools"