Check the power supply performance, and also check that the fans are
working properly. Farther than this, you will have to get deep in to it
with the service manuals, and having the experience and tools to service
it.

If it is not something simple, you will most likely have to send it to
the Sanyo service centre to have it properly repaired. Most of their
servicing is done at the board exchange level, and then they do the
calibration of the boards that they change, if necessary.

--

Jerry G.
======

"Servis za elektroniku ?" wrote in
message om...
Hi,

I have recently purchased on Ebay Sanyo PLC-SU10N (Boxlite CP-10t,
Eiki LC-NB1) LCD projector. Owner said it has burned lamp only.

I have replaced the lamp. Unfortuantely projector doesn't work.

Projectors turns ON. For about 10 sec's lamp lights and then light
goes off. I have checked what is going on trought the lens and I can
see the SANYO sign but it desapers when light from the lapm went off.
Tryied to check how long the SANYO sigh will stay on, with external
light source, and without lamp, and it desapears aproximately the same
moment when light from the lamp goes off - appx. 10 sec.

Any other indications on the controll panel apears to be normal.

Any idea what could be wrong ?