On Wed, 22 Sep 2004 22:54:19 -0600, "Lance Dyer"
put finger to keyboard and composed:

the vertical ic is usually labeled as IC 4-- on the board and should be a LA
7636 or similar label on the ic itself which is mounted on a heat sink
vertical yoke wires should be close by

AFAIK, the LA prefix is most often used by Sanyo. Even though I have
no experience with this particular set, I suspect the vertical IC may
have an AN prefix, and will probably be a Matsu****a part.


- Franc Zabkar
--
Please remove one 's' from my address when replying by email.