Sam Goldwasser schreef in berichtnieuws
...
(Jacques Carrier) writes:

Hi fellow techs,

I am looking for a schematic (or service manual) for this fine DMM.
The first one was zapped by a high voltage pulse from an electric fence.
The other one was zapped by a microwave HV cap. (over 200V).

Don't they have lifetime warranty?


Yupz, but not for abuse, wrong measurements, and the Fluke 'lifetime' is
limited to 7 years...
Then, a repaired Fluke is not guaranteed anymore that it will have the
specifications as before,
unless the main board (read: whole meter PCB) is replaced...




--- sam | Sci.Electronics.Repair FAQ Mirror:
http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ:
http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites:
http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the
excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header is
ignored.
To contact me, please use the feedback form on the S.E.R FAQ Web sites.