Leonard Caillouet wrote:
All true, but in this case it is likely just a tendency in these
units for the solder joints to crack. We see them frequently.

Probably exacerbated by the lack of circulation in the setup he
describes.....

jak
Leonard

"jakdedert" wrote in message
news
Alex C wrote:
"Mark D. Zacharias" wrote in message
...
Solder connection(s) at one or more relays? I was going to suggest
solder connections at the rear panel, which ought to be checked
anyway, but the reference to the "click" made me think of the
relay.

Mark Z.

--
Please reply only to Group. I regret this is necessary. Viruses and
spam have rendered my regular e-mail address useless.


"Alex C" wrote in message
om...
I have had a Sony STR-DE875 amplifier for nearly two problem free
years. It now seems that a couple of channels are dropping out
occasionally predominantly with the centre speaker although there
is a very noticable degredation of sound accross the the front
three speakers.

I have done the test tones when the channels have dropped and the
centre one is completely missing at this point.

There is also an intermittant audible "click" when the unit has
failed much like the click when the unit is switched on.

I do have two units on top of the amp (sky and dvd) but these have
always been there and have not caused any problems in the past. I
have seen a few messages that mention overheating but why would
the unit be overheating now and not before.

Many thanks


Alex

Thanks guys

I would definitely rearrange your setup. It could be that the
cumulative effect of long term, low grade overheating has caused your
problem...assuming it's internal. The very first thing I would
check, however, is all every speaker connection. Sounds stupid, but
one little 'whisker' of wire protruding out of a speaker connector
shorting against the chassis 'could' cause your symptoms. Likewise
a loose screw terminal; or corrosion or weak spring on a spring
terminal.

I've seen all of the above...in a addition to people inserting the
insulated portion of the lead into a spring terminal. The wire
itself was not actually clamped, but was 'just' touching
internally--enough to 'usually' work.

jak