"Moi" wrote in message
...
Hi, I have the Indesit Omega 1200 (WDG1295W) Washer/Dryer.

When I have a relatively small load of socks etc. and put them on to dry
for
120 mins. following a thorough spin-dry, they do not dry properly. It
takes
a total of 6 x 120 min. sessions (12 hours!) before they are reasonably
dry.

This is a washer/dryer with no air exhaust port, it just says in the
manual
that it uses the water expulsion pipe to get rid of the air (presumably
this
just comes out of your sink hole). It has always been bad, but seems
worse
lately.

Any ideas?

Thanks in advance.

Andy

My washer dryer has just been repaired for this very thing, turns out there
was a ball of fluff in the drainage pipe or whatever you call it in the back
of the machine, the bloke had to hook it out with a bent wire coat hanger.
Although the fan was still coming on there was no heat, the ball of fluff
was enough to cause the heater to cut out it seems.
hope thats vaguely helpful, could be the same thing
Suze