Posted to uk.d-i-y
|
|
Drilling/cutting a 30 mm hole in 0.8 mm aluminium
"David" wrote in message
...
On Sat, 29 May 2021 13:29:58 +0100, Fredxx wrote:
On 29/05/2021 13:24, David wrote:
I need to cut a 30 mm hole in some 0.8 mm aluminium.
I have various hole cutting devices such as Forstner bits but they are
for wood.
Is there anything clever for cutting holes in metal sheets?
Any metal cutting hole-saw should be fine. Use oil to stop the aluminium
balling though with just 0.8mm it's only marginally necessary.
Ta.
Having trouble locating a 30 mm one at the moment.
I have also looked at hole punches.
Apparently you drill a pilot hole, insert a bolt, then tighten the cutter
down.
Again not finding 30 mm size.
https://www.ebay.co.uk/itm/362061659406
[At least, not with fast delivery.]
|