What you need is a super giant chip operated cat flap!


Those obviously only unlatch when the pussy comes up to it with their rfid
chip in either direction.
Snags, You might need to be microchipped and it would need to be a pretty
large version of the latch!

I'm assuming all of this netting is to discourage Mr and Mrs Fox etc.
Brian

--

This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"Tricky Dicky" wrote in message
...
On Monday, May 24, 2021 at 11:38:21 AM UTC+1, wrote:
On 24/05/2021 11:29, Chris Green wrote:
I'm looking for a gate latch that will allow a gate to swing both
ways, there are some more constraints/parameters as well:-

It's a fairly light gate, into our chicken run

It needs to be easy to operate from both sides

It can't be one of those U drop over the post ones (see below)


The best sort of thing I can think of is a ring latch something like
this:-

https://www.toolstation.com/ring-han...e-latch/p27158

but without the slotted bit that constrains it from lifting right up
out of the way of the gate post. However I suspect that the above
without the constraint won't be very sound mechanically.

It's made a bit awkward because the gate is quite high and has netting
across all of it so you can't reach through to undo the existing cabin
hook and you can't use the drop-over U type latch because there's
netting right to the top of the gate and the gate post.

Does anyone have any bright ideas for this?

What about a regular sliding bolt, flat on the top so it can be operated
from both sides?
Perhaps a bit over the top for a chicken run but the sliding bolt does
retract all the way with suitable hinges a gate can swing either way

https://www.screwfix.com/p/gatemate-...ock-85mm/511hx

Richard